E62 比刷死情况还糟 55555，拜托各位了！

不知道故，总是连接不上
Flashing started
Creating product data items list
Product data items list created
Backup not required
Initializing
Getting BB5 Phone Information from Update Server...
Asic CMT: Verifying communication to device...
Waiting for communication response: 2
Waiting for communication response: 1
Error 0x84009427 communicating to phone. Unable to verify comm.
Unable to detect device 0x8401F121
Unable to get phone info from update server 0x8401F121
Unable to get phone information from Update Server
Getting BB5 Phone Information from Update Server...
Asic CMT: Verifying communication to device...
Waiting for communication response: 2
Waiting for communication response: 1
Error 0x84009427 communicating to phone. Unable to verify comm.
Unable to detect device 0x8401F121
Unable to get phone info from update server 0x8401F121
Unable to get phone information from Update Server
Initializing
Getting BB5 Phone Information from Update Server...
DEBUG - FUR_CONTROL_SYSTEM_INFO_REQ not supported on device. Skipping detection
FUR: PROTOCOL_FLASH - Error sending message 0x60 to Client 0x10  - 0x84009427
Unable to get PHONE_INFO for Algos. 0x84009427
Unable to get phone info from update server 0x84009427
Unable to get phone information from Update Server
Getting BB5 Phone Information from Update Server...
DEBUG - FUR_CONTROL_SYSTEM_INFO_REQ not supported on device. Skipping detection
FUR: PROTOCOL_FLASH - Error sending message 0x60 to Client 0x10  - 0x84009427
Unable to get PHONE_INFO for Algos. 0x84009427
Unable to get phone info from update server 0x84009427
Unable to get phone information from Update Server

.........

Retry

出现

检查下驱动是否有装好,还有...数据线重新连接好.
E62接口连接数据线可能会比较松....连接好后尽量不要去动线和手机.

又出现问题了
问题不一样了
从这里可以看出是否 数据线有问题呢，我总是查了很多代码，可是具体哪个环节有问题，我也不清楚，请教各位刷机有经验的朋友哦


Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Loading image files...
Waiting for USB device. Press phone's power button (if you start from dead terminal)
ROM Boot Drivers loaded. Creating RAW connection
Connecting to device...
Connection opened
Connection opened to BootCode successfully                                                                                                                    // ，貌似连接成功啊
First wait command succeeded.
First wait command failed. Preparing for bootrom waiting loop ...                                                                                      // 这地方出错
Closing connection
Failed to send config request!
Retrying bootrom connection
Waiting for USB device. Press phone's power button (if you start from dead terminal)
Failed to open RAW USB connection
Unable to set the phone to flash mode. Unable to flash.                                                                                                  // 套件没退出

Flashing phone
Initializing
Loading image files...
Waiting for USB device. Press phone's power button (if you start from dead terminal)
ROM Boot Drivers loaded. Creating RAW connection
Connecting to device...
Connection opened
Connection opened to BootCode successfully
First wait command succeeded.
First wait command failed. Preparing for bootrom waiting loop ...
Closing connection
Failed to send config request!
Retrying bootrom connection
Waiting for USB device. Press phone's power button (if you start from dead terminal)
ROM Boot Drivers loaded. Creating RAW connection
Connecting to device...
Connection opened
Connection opened to BootCode successfully
First wait command succeeded.
First wait command failed. Preparing for bootrom waiting loop ...
Closing connection
Failed to send config request!
Unable to set the phone to flash mode. Unable to flash.
Flashing phone
Initializing
Loading image files...
Waiting for USB device. Press phone's power button (if you start from dead terminal)
Failed to open RAW USB connection
Unable to set the phone to flash mode. Unable to flash.


从来


Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Loading image files...
Waiting for USB device. Press phone's power button (if you start from dead terminal)
ROM Boot Drivers loaded. Creating RAW connection
Connecting to device...
Connection opened
Connection opened to BootCode successfully
First wait command succeeded.
First wait command failed. Preparing for bootrom waiting loop ...                                                                             // 这地方什么命令啊
Closing connection
Failed to send config request!
Retrying bootrom connection
Waiting for USB device. Press phone's power button (if you start


下面是图 强刷中，失败~

[[i] 本帖最后由 xznuwdh 于 2008-7-21 13:34 编辑 [/i]]

好像是驱动的问题。。。具体英文我看不懂。

我装了  84 版 PC 套件啊

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Loading image files...
Waiting for USB device. Press phone's power button (if you start from dead terminal)
ROM Boot Drivers loaded. Creating RAW connection
Connecting to device...
Connection opened
Connection opened to BootCode successfully
First wait command succeeded.
First wait command failed. Preparing for bootrom waiting loop ...
Closing connection
Failed to send config request!
Retrying bootrom connection
Waiting for USB device. Press phone's power button (if you start


我开始按的时候，电脑上有 驱动安装提示.............


可是还是提示 这个问题

Flash: The device driver did not load. Verify phone is connected and powered on.

比较郁闷。

[[i] 本帖最后由 xznuwdh 于 2008-7-21 13:51 编辑 [/i]]

好像是说没有驱动还是装不上驱动?我看不懂...是驱动的问题就是
多试试....不过估计没戏...得找盒子刷.

找个干净的系统，重装凤凰再刷试试，很多失败的原因总是出在凤凰身上

谢谢，刚才好像有点希望了，可是又失败了！！！！！！！！！

对了，装凤凰 2008 和 ROM 其他就不用装了吧........PC 套件要装么 》？


我是刷 死机的 ！ 可是失败再失败

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Loading image files...
Waiting for USB device. Press phone's power button (if you start from dead terminal)
ROM Boot Drivers loaded. Creating RAW connection
Connecting to device...
Connection opened
Connection opened to BootCode successfully
First wait command succeeded.
First wait command failed. Preparing for bootrom waiting loop ...
Closing connection
Failed to send config request!
Retrying bootrom connection
Waiting for USB device. Press phone's power button (if you start from dead terminal)
ROM Boot Drivers loaded. Creating RAW connection
Connecting to device...
Connection opened
Connection opened to BootCode successfully
First wait command succeeded.
First wait command failed. Preparing for bootrom waiting loop ...
Closing connection
Failed to send config request!
Unable to set the phone to flash mode. Unable to flash.
Flashing phone
Initializing
Loading image files...
Waiting for USB device. Press phone's power button (if you start from dead terminal)

[[i] 本帖最后由 xznuwdh 于 2008-7-21 15:22 编辑 [/i]]

回复 #9 xznuwdh 的帖子

不需要其它的...凤凰2008安装好就有驱动了.

烟灰朋友，你看下 9 楼的 图片，再那 25 次之后，就出错了.

是点 Restore  User Product

还是点  Refurbish ？

[[i] 本帖最后由 xznuwdh 于 2008-7-21 15:27 编辑 [/i]]

又有反映了。。。。。。。。。。

这种情况，还有救么 ？

[[i] 本帖最后由 xznuwdh 于 2008-7-21 15:38 编辑 [/i]]

这时候是不是该 按 开机键呢 还是等待 ？？ 求救 ！！！！！！！！！！！！！！！！！！！

最后 成这样了
[align=center][attach]2638998[/attach][/align]


Retry 后

[align=center][attach]2638999[/attach][/align]

[[i] 本帖最后由 xznuwdh 于 2008-7-21 15:46 编辑 [/i]]

不用...你就等就行...快结束了...

老大，你在看下那上面那帖，谢谢

回复 #15 xznuwdh 的帖子

[yct03] 刚回帖的时候没图...
现在图也还没出来....

13# 楼的帖


图片！

好像还是驱动的问题吧!你能不能翻译啊?

我试了下 JAF 刷

出现这样情况


JAF version 1.98.47
Detected PKEY: 90012345
Card life counter: 100.00%
P-key nokia module version 01.01
FBUS INTERFACE NOT CONNECTED!!!
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE

Changing flashing settings...
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-88\rm88_18.06.32_China.c00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-88\rm88_18.06.32.v05
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-88\rm88_cp_China_2.2.fpsx
No erase block detected! Erase will be skiped!
APE Variant file: NONE
PRESS POWER ON THE PHONE NOW!!!
Searching for phone...Detected P-KEY: 90012345
P-key nokia module version 01.01
Init usb communication...
Found
Starting DEAD USB phone flashing...
Error reading phone init data...
PRESS POWER ON THE PHONE NOW!!!
Searching for phone...Detected P-KEY: 90012345
P-key nokia module version 01.01
Init usb communication...
Found
Starting DEAD USB phone flashing...
Error reading phone init data...
Changing flashing settings...
PRESS POWER ON THE PHONE NOW!!!
Searching for phone...Detected P-KEY: 90012345
P-key nokia module version 01.01
Init usb communication...
Found
Starting DEAD USB phone flashing...
Error reading phone init data...
PRESS POWER ON THE PHONE NOW!!!
Preparing for downgrade...
Detected P-KEY: 90012345
P-key nokia module version 01.01
Init usb communication...
Failed to prepare for downgrade...
Changing flashing settings...
PRESS POWER ON THE PHONE NOW!!!
Searching for phone...Detected P-KEY: 90012345
P-key nokia module version 01.01
Init usb communication...
Found
Starting DEAD USB phone flashing...
Error reading phone init data...
PRESS POWER ON THE PHONE NOW!!!
Searching for phone...Detected P-KEY: 90012345
P-key nokia module version 01.01
Init usb communication...
Found
Starting DEAD USB phone flashing...
Error reading phone init data...
Changing flashing settings...
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-88\rm88_18.06.32_China.c00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-88\rm88_18.06.32.v05
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-88\rm88_cp_China_2.2.fpsx
No erase block detected! Erase will be skiped!
APE Variant file: NONE
PRESS POWER ON THE PHONE NOW!!!
Searching for phone...Detected P-KEY: 90012345
P-key nokia module version 01.01
Init usb communication...
Found
Starting DEAD USB phone flashing...
Error reading phone init data.....

写不进去东西么 ？还是 ..

估计是没戏了....

LZ我的也是刷死机，看到13楼的图片和我的一样，有戏

我的81也是被我升级的时候出错，取了电池，变成了砖头。用强刷后也和你一样。13楼的图片。这时我的81上有local mode 的显示，其实已经刷好了，只是手机自检的问题。我关机，发现关不了。就又拔电池。然后又刷。到要按开机键的那一步，结果奇迹出现了：手机开了。正常开机。赶快把刷机关了。搞定！我的81又活了~！[s:26] 加油，有希望的！[s:25]

好，谢谢你~

是不是 USB 驱动问题啊 ？
头大了
谁来救救我啊~~

回复 #23 xznuwdh 的帖子

根据上面的提示。。。就是驱动的问题。我不已经说了几次了。。。

额，我想问下，解决这个驱动问题，是还有机会可以刷回来的么 ？？

当然有的，只要硬件还好就可以。用pc套件6.84的驱动试试吧
[s:23]

回复 #25 xznuwdh 的帖子

理论上....这样会有希望些...

烟灰，我现在插上电源后，就一直 白屏...............就那样

还有 驱动装不上，会和系统有关系么 ？

我的是 雨木林风 Ghost  装机版 XP SP3

会不会是系统问题呢？ 还是 凤凰的问题呢？

凤不支持 E62 机子 是么 ？

回复 #28 xznuwdh 的帖子

和电脑系统一般没什么关系,那系统我用过...
凤凰支持刷E62的...

7.总结出刷机造成的不能开机问题和解决办法！
(1)开机出现NOKIA LOGO，此时屏幕固定，不能进入系统！无法关机，只能取下电池！
遇到这个问题，一般是由于刷机的时候各种原因造成的系统不完整！
解决办法：使用强刷！
(2)无法开机，按电源按钮没有反应！这个和第1种差不多，都是系统的问题！此时大家不要慌！
解决办法：适用强刷！
(3)开机白屏，并且无法用电源按钮关机！只能取下电池！
这个问题一般是由于刷机过程中数据线脱落或者电脑端出问题造成的！
解决办法：用强刷时刷不了的！只能去找专业手机维修的手机店使用专业的USF或者JAF等设备来刷！

我知道问题所在了。应该是版本被我刷低了。

可是如何再刷回来呢 ？ 找高版本的吗 ？

我的 code: 0530924  

应该美版 E62 的，被刷成中国移动定制版.

我刷的时候，可能选的不对，也没有改 code...现在 出错....不知道如何继续下去 ？ 现在还有办法 改 code 么 ？ 还是找

高版本 ROM  ？ 还是 花钱去啊 (实在解决不了，肯定花钱). 比较这个机器还不知道 如何刷........不知道如何继续下去了  


12# 楼的过程依旧~